• Epoxy-Gloss-Floor-Paint-Coating (17)
  • Epoxy-Floor-Paint-Colours
  • Epoxy-Gloss-Floor-Paint-Coating
  • Epoxy-Gloss-Floor-Paint-Coating
  • Epoxy-Gloss-Floor-Paint-Coating
  • Epoxy-Gloss-Floor-Paint-Coating
  • Epoxy-Gloss-Floor-Paint-Coating

Rizistal EC220 – Gloss Epoxy Paint Coating

5.00 out of 5 based on 1 customer rating
(1 customer review)

Prices from: £77.50 (Incl VAT)

£64.58 (Excl VAT)

Protect masonry, ceramic and concrete floors from oil and chemical contamination with Rizistal EC220 Gloss Epoxy Paint Coating. Available in 9 colours, this is our most popular paint product and can applied to almost all substrates.

Coverage to concrete is approximately 22 m² to 24 m² per 5 kg and 44 m² to 48 m² per 10 kg. One coat is generally sufficient for many applications.


Protect masonry, ceramic and concrete floors from oil and chemical contamination with Rizistal EC220 Gloss Epoxy Paint Coating.

Its high build formulation ensures a good film thickness, reducing the number of required coats.

The floor paint coating will cure to a very hard, imperious gloss finish and is available in 9 different colours to suit company branding, match an existing floor or create new areas and walkways.


CAUTION! Please read.

Please do not confuse our Rizistal EC paint and coating systems with conventional heavy duty floor paints, which are available through normal retail outlets and hardware stores.

All of our paints and coatings are made from pure, concentrated resin. This provides extremely high performance characteristics, which far exceed normal floor paints.

You can expect vastly superior wear & abrasion resistance, chemical resistance, film thickness and excellent adhesion to correctly prepared substrates.

Once applied correctly, a Rizistal paint or coating will provide a one-time, life-long performance.

No need to re-paint your floors every 6 months with us!


Floor Paint Coating Benefits

  • Excellent wear and abrasion resistance.
  • Excellent chemical resistance to both acid and alkali based chemicals.
  • Match an existing coloured floor or complement company branding colours.
  • Virtually solvent free.


Approx. 22 m² to 24 m² per 5 kg and 44 m² to 48 m² per 10 kg. One coat is generally sufficient for many applications.

Surface Preparation

Concrete to be treated must be dry and cured for a minimum of 4 weeks. Concrete must be free of any surface laitance, contaminants, and have an effective DPM to prevent rising dampness.

All loose or friable surface material should be removed. Hand floated or power floated concrete or any concrete with a smooth surface should be abraded prior to floor coating application to provide a key to ensure that the coating bonds well.

All dust should be vacuumed away prior to application. Grease or oil should be removed with a proprietary degreaser and the area thoroughly hosed off and allowed to dry. Smooth previously painted surfaces should be abraded thoroughly to provide a key for adhesion.

Remove friable or flaking rust and any previous coatings by wire brushing or angle grinding fitted with an appropriate cup wire or carborundum head to achieve a bright surface.

Grease or oil should be removed with a proprietary degreaser and the metal then washed with water and allowed to dry. Coating should be carried out immediately before flash rusting occurs.

Working Time

30 to 40 minutes depending on ambient temperatures. Higher ambient temperatures will reduce the pot life. Always decant into a shallow tray, to extend working time.

Curing Time

After installation, this product must be kept clean and dry for 12 to 18 hours, otherwise the product performance will be seriously affected, which may result in discolouration and lack of cure.

This product will cure overnight at 15°C to accept light traffic the next day. Full chemical and wear resistance is achieved over 5 to 7 days in similar ambient temperatures.

Temperatures below 10°C will slow down the curing of the product. Temperatures below 5°C will arrest curing. Water or chemicals should not be allowed to lie on the surface for at least 7 days. Avoid washing the floor for 7 days after coating.

Chemical Resistance

This floor coating cures to a very hard, impervious, gloss finish that will resist strong acid and alkali based chemicals. As with all high build gloss paint systems, scratching of the surface could occur due to movement of point loads and impacts.

Temperature Resistance

Will withstand temperatures up to 60°C in both operating and cleaning activities.

General Maintenance

When fully cured, acid and alkali detergents or degreasers may be used to clean the surface. Always follow manufacturer recommendations.

For more technical information about this product and its installation, please download its technical data sheet.


Technical Data | EC220 Epoxy Gloss Floor CoatingInstructions | EC220 Epoxy Gloss Floor CoatingMSDS Base | EC220 Epoxy Gloss Floor CoatingMSDS Hardener | EC220 Epoxy Gloss Floor Coating

Additional information


Stone, Light Grey, Dark Grey, Black, Grass Green, Bright Blue, French Blue, Golden Yellow, Office Red

Weight kg

5 kg, 10 kg

1 review for Rizistal EC220 – Gloss Epoxy Paint Coating

  1. 5 out of 5

    (verified owner)

    I did quite a lot of research into epoxy floor paint because none of it is cheap and I wanted to be sure i was buying the best money could buy. Made contact with Alex with a few questions and he was extremely helpful and prompt with his responses, settled on dark grey gloss and placed the order. It arrived lightning quick and was superbly packaged, I plumped for the fast cure as I wanted it to be useable asap. The YouTube videos were invaluable in terms of preparation, mixing and application and instilled me with confidence to get it done. The fast cure does exactly that – cures very fast – we had three of us to apply it, one was doing edges with a small roller and brush whilst the other two worked the large areas with rollers also bought from Rizistal. Its an amazing product and certainly looks to be up to what need from it. The service, backup, advice and product was fantastic and I would highly recommend Rizistal and its products.

    • Thanks for your review, Simon! Glad to hear the application went well for you. Please do not hesitate to get back in touch soon!


Add a review

Your email address will not be published. Required fields are marked *

You may also like…