• Cold-Cure-Anti-Slip-Floor-Paint-Coating-p
  • Epoxy-Floor-Paint-Colours
  • Cold-Cure-Anti-Slip-Floor-Paint-Coating
  • Cold-Cure-Anti-Slip-Floor-Paint-Coating
  • Cold-Cure-Anti-Slip-Floor-Paint-Coating
  • Cold-Cure-Anti-Slip-Floor-Paint-Coating

Rizistal EC258 – Cold Cure Antislip Epoxy Paint

Prices from: £100.57 (Incl VAT)

£83.81 (Excl VAT)

Provide safety under foot in cold conditions on masonry, ceramic and concrete floors using Rizistal EC258 Cold Cure Antislip Gloss Epoxy Paint in 9 Colours. With excellent slip resistance, this cold curing paint can be applied as low as 0 oC.

Approx. 22 m² to 24 m² per 5 kg and 44 m² to 48 m² per 10 kg. One coat is generally sufficient for many applications, however, if ease of clean is important for the newly applied system, a second coat without aggregate (EC220) broadcast is recommended.

Description

Provide safety under foot in cold conditions (>5°C) with this Rizistal EC258 Cold Antislip Gloss Epoxy Paint, which is available in 2 aggregate sizes; medium and coarse.

  • Medium: Recommended for general interior trafficked areas and walkways.
  • Coarse: Recommended for interior and exterior areas, inclines, ramps and walkways.

This floor paint is ideal for protecting masonry, ceramic and concrete floors from oil and chemical contamination.

Its high build formulation ensures a good film thickness, reducing the number of required coats.

The floor coating will cure in temperatures down to 0°C to a very hard, imperious gloss finish and is available in 9 different colours.

 

CAUTION! Please Read.

Please do not confuse our Rizistal paint and coating systems with conventional heavy duty floor paints, which are available through normal retail outlets and hardware stores.

All of our paints and coatings are made from pure, concentrated resin. This provides extremely high performance characteristics, which far exceed normal floor paints.

You can expect vastly superior wear & abrasion resistance, chemical resistance, film thickness and excellent adhesion to correctly prepared substrates.

Once applied correctly, a Rizistal paint or coating will provide a one-time, life-long performance.

No need to re-paint your floors every 6 months with us!

 

Cold Cure Anti Slip Floor Paint Coating Benefits

  • Installation in cold conditions
  • Anti slip surface for safety under foot
  • Excellent wear and abrasion resistance
  • Excellent chemical resistance to both acid and alkali based chemicals
  • Virtually solvent free

Coverage

Approx. 22 m² to 24 m² per 5 kg and 44 m² to 48 m² per 10 kg. One coat is generally sufficient for many applications, however, if ease of clean is important for the newly applied system, a second coat without aggregate broadcast is recommended.

Surface Preparation

CONCRETE
Concrete to be treated must be dry and cured for a minimum of 4 weeks. Concrete must be free of any surface laitance, contaminants, and have an effective DPM to prevent rising dampness.

All loose or friable surface material should be removed. Hand floated or power floated concrete or any concrete with a smooth surface should be abraded prior to floor coating application to provide a key to ensure that the coating bonds well.

All dust should be vacuumed away prior to application. Grease or oil should be removed with a proprietary degreasant and the area thoroughly hosed off and allowed to dry. Smooth previously painted surfaces should be abraded thoroughly to provide a key for adhesion.

METAL
Remove friable or flaking rust and any previous coatings by wire brushing or angle grinding fitted with an appropriate cup wire or carborundum head to achieve a bright surface.

Grease or oil should be removed with a proprietary degreasant and the metal then washed with water and allowed to dry. Coating should be carried out immediately before flash rusting occurs.

Working Time

20 to 30 minutes depending on ambient temperatures. Higher ambient temperatures will reduce the pot life. Always decant into a shallow tray, to extend working time.

Curing Time

After installation, this product must be kept clean and dry for 12 to 18 hours, otherwise the product performance will be seriously affected, which may result in discolouration and lack of cure.

This product will cure overnight at 5°C to accept light traffic the next day. Full chemical and wear resistance is achieved over 5 to 7 days in similar ambient temperatures. Temperatures below 5°C will slow down the curing of the product. Temperatures below 0°C will arrest curing. Water or chemicals should not be allowed to lie on the surface for at least 7 days. Avoid washing the floor for 7 days after coating.

Anti Slip Properties

2 grades of extremely hard wearing anti slip aggregate is available; medium and coarse.

When installed as directed, it is classified as Low Slip Potential Flooring (>40 PTV using the pendulum test method) in both wet and dry conditions. Testing was carried out and results assessed as described in ‘The Assessment of Floor Slip Resistance: The UKSG Guidelines issue 4 / 2011’. Results were obtained from tests carried out from our own internal laboratory tests.

Continued slip resistance can only be maintained if the guidelines in the HSE’s STEP tool (Slips and Trips eLearning Package) are followed.

All figures are measured and expressed under laboratory conditions: Actual performance may vary from the above values depending upon site conditions.

Chemical Resistance

This floor coating cures to a very hard, impervious, gloss finish that will resist strong acid and alkali based chemicals. As with all high build gloss paint systems, scratching of the surface could occur due to movement of point loads and impacts.

Temperature Resistance

Will withstand temperatures up to 60°C in both operating and cleaning activities.

General Maintenance

When fully cured, acid and alkali detergents or degreasers may be used to clean the surface. Always follow manufacturer recommendations.

For more technical information about this product and its installation, please download its technical data sheet.

Downloads

Technical Data | EC258 Epoxy Gloss Floor Coating Cold Cure Anti SlipInstructions | EC258 Epoxy Gloss Floor Coating Cold Cure Anti SlipMSDS Base | EC258 Epoxy Gloss Floor Coating Cold Cure Anti SlipMSDS Hardener | EC258 Epoxy Gloss Floor Coating Cold Cure Anti SlipMSDS Anti Slip | EC258 Epoxy Gloss Floor Coating Cold Cure Anti Slip

Additional information

WeightN/A
Colour

Stone, Light Grey, Dark Grey, Black, Grass Green, Bright Blue, French Blue, Golden Yellow, Office Red

Weight kg

5 kg, 10 kg

Anti Slip Grade

Medium Grade, Coarse Grade

Reviews

There are no reviews yet.

Be the first to review “Rizistal EC258 – Cold Cure Antislip Epoxy Paint”

Your email address will not be published. Required fields are marked *

You may also like…